where do i put the O-rings That came with MY PERCOLATOR?

Magma and Obsidian come with FDA approved high-temperature silicone O-rings to help make a proper seal to your Easy Valve Herbal Chamber. They not only help to seal the vapor flow path, but also act to secure the device to the Easy Valve Herbal Chamber.  The O-rings are to be assembled as follows*:

o-ring Assembly:

1. Remove the Blue O-ring that came with your Easy Valve Herbal Chamber

2. Place the SMALLEST O-ring in the position previously occupied by the Blue O-ring

3. Assemble your percolator on the Easy Valve Herbal Chamber by pushing down with a slight twisting motion

4. Check for a thin line seal to appear between the O-ring and your percolator which will indicate a proper seal is being made.

5. If you do NOT notice a thin line seal, or you notice vapor leaking from your percolator during use, remove the O-ring and replace it with the next largest O-ring. Continue in this fashion until a proper seal is achieved. If you are having trouble making a proper seal, please watch the O-ring Assembly Demonstration video, and contact support@magma-industries.com if further assistance is needed.

* Please Note: Magma and Obsidian are made from hand blown borosilicate and therefore have larger size tolerances than your Easy Valve or Hybrid Valve Herbal Chamber. To accommodate these size differences Magma and Obsidian are shipped with three different size O-rings. Begin by assembling the SMALLEST O-ring, and only increase O-ring size if you notice vapor is escaping from the device during use. You will observe a thin line appear from the O-ring when properly sealed. The included O-rings allow the vast majority of all devices to function properly. If you experience vapor leaking from your device, or your device does not sit securely on your Easy Valve or Hybrid Valve Herbal Chamber, contact support@magma-industries for assistance. We will always work to ensure your device fits properly and delivers the finest quality vapor available.